Reversing Lamp Switch, Replace (F13/F13+/F17+)
Remove
1. |
Detach lower engine cover
Note: If necessary.
|
2. |
Remove reversing lamps switch (1).
• |
Disconnect wiring harness plug from reversing lamp switch
|
• |
Unscrew reversing lamp switch
|
|
|
|
Install
3. |
Install reversing lamp switch
Note: Use new seal
ring.
• |
Tighten reversing lamp switch (1) 20
Nm
|
• |
Connect wiring harness plug to reversing lamp switch
|
|
|
|
4. |
Check transmission fluid level
|
5. |
Attach lower engine cover
Note: If present.
|
|