Switch and/or Ultrasonic Sensor for Anti-Theft
Warning System, Replace
Remove
1. |
Unclip panel for microphone (2) and panel for sliding sun roof
control unit (3)
• |
unclip using suitable tool (screwdriver)
|
|
2. |
Unclip glass from interior lamp (1)
|
|
|
3. |
Detach front interior lamp holder
• |
Unclip holder (4) all round
|
• |
Unclip wiring harness holder (2)
|
• |
Disconnect wiring harness plug (3
|
|
|
|
4. |
Remove switch with ultrasonic sensors
• |
Unclip compact plug (1)
|
• |
Release and disconnect wiring harness at compact plug
(arrow)
|
• |
Unclip and remove panel with ultrasonic sensors (2)
|
|
|
|
Install
5. |
Install switch with ultrasonic sensors
• |
Clip in panel with ultrasound sensors
|
• |
Insert wiring harness in compact plug and lock
|
|
6. |
Attach front interior lamp holder
• |
Connect wiring harness plug
|
• |
Clip in wiring harness holder
|
• |
Clip in holder all round
|
|
7. |
Clip in glass for interior lamp
|
8. |
Clip in microphone panel and panel for sliding sun roof control
unit
|
|