Customer complaint
|
Remedy
|
Display does not correspond selected radio function
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Perform the following test step:
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
|
|
Display does not correspond selected navigation function
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Perform the following test step:
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
|
|
Display does not correspond selected air conditioning function
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Perform the following test step:
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
|
|
Display does not correspond selected board computer function
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
DIS (Info Display)
- Check the following data list parameters:
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
|
|
Time is not displayed correctly
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
DIS (Info Display)
- Check the following data list parameters:
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
|
|
Outside temperature is not displayed correctly
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
DIS (Info Display)
- Check the following data list parameters:
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
|
|
Date is not displayed correctly
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
DIS (Info Display)
- Check the following data list parameters:
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
|
|