Replace Open and Start receiver in front door
Remove
|
1. |
Detach handle panel (3), front door inner panelling
• |
Lever out upwards with plastic wedge
|
|
2. |
Remove inner panelling for exterior mirror (1)
• |
Disconnect wiring harness plug
|
|
3. |
Detach interior door actuation panel (2)
• |
Lever out with plastic wedge
|
|
|
|
4. |
Detach front door inner panelling
• |
Unscrew 7x bolt (arrows)
Note: Use a plastic
wedge to detach the inner panelling (1).
|
|
|
5. |
Detach front door inner panelling
• |
Disconnect wiring harness plug
|
• |
Unhook interior door actuation Bowden cable (arrows)
|
|
|
|
6. |
Disconnect wiring harness plug of Open and Start system
• |
Disconnect wiring harness plug
|
|
|
|
7. |
Detach front door panel
• |
Lever out panel (1) with a plastic wedge
|
|
|
|
|
8. |
Remove fixed front door handle component with lock cylinder
• |
Pull moveable handle component (I) outward and hold
|
• |
Turn bolt (II) anticlockwise until it audibly reaches a
stop
Note: The moveable
handle component must now be fixed in the pulled position.
|
• |
Remove fixed handle component with lock cylinder (IV)
|
|
9. |
Remove door handle
• |
Remove moveable handle component (III) rearward
|
|
|
Install
10. |
Install door handle
• |
Insert moveable handle component in door panel
|
|
11. |
Install fixed front door handle component with lock
cylinder
• |
Insert fixed handle component with lock cylinder
|
• |
Turn bolt clockwise until it audibly reaches a stop
Note: While turning the
bolt, the moveable handle component must be pulled.
|
|
12. |
Attach front door panel
|
13. |
Connect wiring harness plug of Open and Start system
|
14. |
Insert front door inner panelling
• |
Connect wiring harness plug
|
• |
Attach interior door actuation Bowden cable
|
|
15. |
Attach front door inner panelling
|
16. |
Attach inner panelling for exterior mirror
• |
Connect wiring harness plug
|
|
17. |
Attach interior door actuation panel
|
18. |
Attach handle panel, front door inner panelling
|
|