vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

C-004 Control Unit Hard- and Software 3 > < C-002 Control Unit Hard- and Software 1

C-003 - Control Unit Hard- and Software 2

Test

Work Order Description

Nominal Value

T001

Check: Vehicle Configuration

Is the following information correct for the actual vehicle?

Vehicle with REC (Rear Electronic Module)
Yes: No:
T002

Check: Vehicle Configuration

Is the following information correct for the actual vehicle?

Vehicle without REC (Rear Electronic Module)
Yes: No:


Result

Cause Of Fault

E001 Result: Defective Component
  • Defective component:
    P6 Info Display
    or
    X131 Rear Electronic Module

Important:

Reset the concerned control unit with the diagnostic tester before replacing it. In order to do that, call up the "RESET" function from the PROGRAMMING menu of the current system on the diagnostic tester.

Note:

The replacement of the components must be done in the listed order.

The system must be checked for proper operation after every replacement.

E002 Result: Defective Component
  • Defective component:
    P6 Info Display
E003 Invalid / not supported vehicle configuration
  • The selected Checking Procedure is not valid for this vehicle configuration.





C-004 Control Unit Hard- and Software 3 > < C-002 Control Unit Hard- and Software 1