Replace radio (EHU)
Note: When replacing
the control unit, before removing the control unit carry out a
Reset with TECH 2.
Remove
2. |
Remove radio
• |
Introduce removal bar KM-6067 into
openings (arrows) until it engages
– |
Press both removal bars outwards and at the same time withdraw
the radio from the holder.
|
|
|
3. |
Disconnect wiring harness plug
• |
Disconnect 2x wiring harness plug (1) and (2)
|
|
|
|
Install
4. |
Connect wiring harness plug
• |
Connect 2x wiring harness plug
|
|
5. |
Install radio
• |
Push radio into holder until it engages
|
|
7. |
Program volatile memories
Note: When replacing
the control unit, program control unit with TECH 2.
|
|