Control Unit Bracket, Open & Start, Replace
L67
Note: When replacing
the control unit, before removing the control unit carry out a
"Reset" using TECH2.
Remove
2. |
Remove luggage compartment lining (left side) L67
|
|
3. |
Remove control unit bracket
|
|
4. |
Remove Open & Start control unit
• |
Release wiring harness plug (1) and disconnect
|
• |
Unclip control unit (2)
|
|
|
|
Install
5. |
Install control unit bracket
|
6. |
Install Open & Start control unit
• |
Connect and lock wiring harness plug
|
|
7. |
Install luggage compartment lining (left side) L67
|
9. |
Program volatile memories
Note: When replacing
the control unit, before removing the control unit carry out a
"Reset" using TECH2.
|
|