vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Schematic and Routing Diagrams > < Replace column integration module (CIM)

Field Remedy: 2390

Subject: CIM (Steering Angle Sensor) - Calibration and enter security code impossible
Models: Engines: Option:
Astra-H 2004...,Zafira-B 2005... All,All ESP
Complaint: Calibrating steering angle sensor is impossible. While calibrating, Tech 2 displays "Wrong security code" even though the correct code was entered.
Cause: The steering angle sensor of the CIM becomes twisted after removing either the steering wheel or steering gear. In the datalist ABS/ESP, the parameter steering angle sensor always reads 0 degrees even though the steering wheel is turned.
Production:

Remedy:

In case of complaint disconnect the battery for 5 minutes. Remove 
the steering wheel and adjust the middle position of the CIM. Then 
reconnect the battery. Now it is possible to enter the security code 
as well as calibrating the steering angle sensor. Replacing the CIM 
is not necessary. 

FunctionalGroup: N - Electrical Equipment
Complaint Group: 23 - Wrong Indication
Trouble Code: None

Schematic and Routing Diagrams > < Replace column integration module (CIM)