vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Component Locator > < Replace Open and Start receiver in bottom of rear panel L35

Replace air quality sensor

  Remove

1.   Remove windscreen trim seal (1)
2.   Remove wiper arms (2)
•   Remove 2x cover
•   Unscrew 2x nut
•   Remove 2x washer
•   Pull off wiper arm using KM-6626-30
•   Detach hose for wash/wipe system
Object Number: 3446487  Size: DEFAULT


3.   Remove air quality sensor
•   Unclip sensor (1)
•   Release wiring harness plug (2) and disconnect
Object Number: 8326795  Size: DEFAULT


  Install

4.   Install air quality sensor
•   Connect and lock wiring harness plug
•   Clip in sensor
5.   Attach windscreen trim
•   Attach hose for wash/wipe system
•   Clip in 5x clip
6.   Install screen wiper arms
•   Place 2x windscreen wiper arm on shaft
Note:   Ensure correct installation position of screen wiper arms!
•   Install 2x washer
•   Tighten 2x nut 17 Nm
•   Fit 2x cover
7.   Fit windscreen trim seal

Component Locator > < Replace Open and Start receiver in bottom of rear panel L35