Replace control unit for headlamp range control
(AHL)
Remove
Note: When replacing
the control unit, before removing the control unit carry out a
Reset with TECH 2.
2. |
Remove panel, lower instrument panel padding
|
3. |
Remove control unit
• |
Remove control unit
– |
Release wiring harness plug (2) and disconnect
|
|
|
|
|
Install
4. |
Fit control unit
• |
Connect wiring harness plug
|
|
5. |
Install panel, lower instrument panel padding
|
7. |
Program volatile memories
• |
When replacing the control unit, after fitting the control unit
carry out a Program with TECH 2.
|
|
|