|
Flashing, incorrect or no display in the info display
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Programming
- Select the following Functional System on the diagnostic tester:
DIS (Info Display)
- Perform the following programming:
- After programming successfully, check if the system malfunction is still present.
- If the malfunction is still present, continue with the following tests:
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
|
|
The Colours in the Colour Info Display are not Displayed Correctly
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Actuator Tests
- Select the following Functional System on the diagnostic tester:
DIS (Info Display)
- Perform the following Actuator Tests:
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
|
