|
Display shows "Check Brake Light Switch"
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
Exterior Lighting and Turn Indicator System
- Check the following data list parameters:
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
|
|
Display shows "Check Washing Water Level"
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
Instrument
- Check the following data list parameters:
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
|
|
Display shows "ACC Clean Windscreen"
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
|
