Replace hose for tailgate window wash/wipe system
L48
2. |
Detach tailgate upper inner panelling - left side
• |
Unscrew parcel shelf mounting
|
|
3. |
Detach tailgate upper inner panelling - right side
• |
Unscrew parcel shelf mounting
|
|
|
|
|
5. |
Detach hose up to tailgate boot
• |
Disconnect wiring harness plug (1)
|
|
|
|
6. |
Expose hose
• |
Detach boot (1) at tailgate
|
• |
Expost wash/wipe system hose
– |
Cut duct tape at (2) and (3)
|
|
|
|
|
7. |
Disconnect and detach hose
• |
Disconnect hose at C-pillar joint (1)
|
• |
Detach hose
– |
Unclip 5x clip (2) and (3)
|
|
|
|
8. |
Remove hose
• |
Pull new hose with the old hose
Note: Fasten new hose
to old hose with adhesive tape.
|
|
|
|
Install
9. |
Route and connect hose
|
10. |
Install moulded headlining
|
11. |
Attach tailgate upper inner panelling - right side
• |
Fasten parcel shelf mounting
|
|
12. |
Attach tailgate upper inner panelling - left side
• |
Fasten parcel shelf mounting
|
|
14. |
Program volatile memories
|
|