vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Wiring Harness - Rear End Panel - Replace L35 > < Replace front door wiring harness - L67

Wiring Harness - Rear End Panel - Replace L08

Important:   Replace or repair wiring harnesses observing the safety regulations of electrics/electronics.

  Remove

1.   Disconnect battery.
2.   Remove rear inner panelling, side panel, both sides LUREF_1.gif


3.   Remove wiring harness, rear end panel
Note:   The illustration shows the vehicle without attaching parts for a clearer representation.
•   Disconnect 7x wiring harness plug
•   Disconnect earth connection
Unscrew nut
•   Undo 16x clip
•   Remove wiring harness

  Install

4.   Install wiring harness, rear end panel
•   Position wiring harness
•   Clip in 16x clip
•   Connect earth connection
Tighten nut
•   Connect 7x wiring harness plug
5.   Install rear inner panelling, side panel, both sides LUREF_1.gif
6.   Connect battery.
7.   Program volatile memories

Wiring Harness - Rear End Panel - Replace L35 > < Replace front door wiring harness - L67