|
Wiring Harness, Rear Number Plate Lamp - Replace
L69
Important: Replace
or repair wiring harnesses observing the safety regulations of
electrics/electronics.
 Remove
| 3. |
Remove number plate lighting
| • |
Remove left number plate lamp
|
| • |
Disconnect left wiring harness plug
|
| • |
Disengage right bracket
|
| • |
Remove right number plate lamp
|
| • |
Disconnect right wiring harness plug
|
|
|
| 4. |
Remove impact absorber (1)
| • |
4x unclip from rear panelling bracket (3)
|
| • |
Remove impact absorber with number plate lighting wiring
harness
|
|
| 5. |
Remove number plate lighting wiring harness
| • |
Remove wiring harness from impact absorber guide
|
|
|
Install
| 6. |
Install number plate lighting wiring harness
| • |
Position and insert wiring harness in impact absorber guide
|
|
| 7. |
Install impact absorber
| • |
Insert impact absorber with number plate lighting wiring
harness
|
| • |
4x clip into rear panelling bracket
|
|
| 8. |
Install number plate lighting
| • |
Connect right wiring harness plug
|
| • |
Position right number plate lamp
|
| • |
Connect left wiring harness plug
|
| • |
Position left number plate lamp
|
|
| 9. |
Install front panelling
|
| 10. |
Program volatile memories
|
|
