Parameter
|
System State
|
Expected Value
|
Definition
|
Operating Conditions: Ignition ON
|
Battery Voltage
|
-
|
11-14 V
|
The scan tool displays V. This is the current battery voltage.
|
Front Steering Position Sensor Circuit
|
Steering wheel in straight position
|
-5 to +5°
|
The scan tool displays °. This is the current position of the
steering angle sensor.
|
Steering wheel turned left until stop
|
450-550°
|
Steering wheel turned right until stop
|
-550 to -450°
|
Left Front Damper Actuator Command
|
-
|
varies
|
The scan tool displays mA. This is the current applied to the left
front damper actuator.
|
Left Front Vertical Body Acceleration
|
-
|
0 m/s²
|
The scan tool displays m/s². This is the signal from the left
front body acceleration sensor.
|
Left Front Vertical Wheel Acceleration
|
-
|
0 m/s²
|
The scan tool displays m/s². This is the signal from the left
front wheel acceleration sensor.
|
Left Rear Damper Actuator Command
|
-
|
varies
|
The scan tool displays mA. This is the current applied to the left
rear damper actuator.
|
Rear Vertical Body Acceleration
|
-
|
0 m/s²
|
The scan tool displays m/s². This is the signal from the rear
body acceleration sensor.
|
Right Front Damper Actuator Command
|
-
|
varies
|
The scan tool displays mA. This is the current applied to the
right front damper actuator.
|
Right Front Vertical Body Acceleration
|
-
|
0 m/s²
|
The scan tool displays m/s². This is the signal from the
right front body acceleration sensor.
|
Right Front Vertical Wheel Acceleration
|
-
|
0 m/s²
|
The scan tool displays m/s². This is the signal from the
right front wheel acceleration sensor.
|
Right Rear Damper Actuator Command
|
-
|
varies
|
The scan tool displays mA. This is the current applied to the
right rear damper actuator.
|
Suspension Position Sensor 5 V Reference
|
-
|
4.8-5.2 V
|
The scan tool displays V. This is the wheel and body acceleration
sensors supply voltage.
|
Suspension System Mode
|
-
|
Normal
|
The scan tool displays Normal, Comfort, Sport Mode, depending on
the selected mode. If a fault is detected, Undefined is
displayed.
|
Tour mode switch pressed
|
Comfort
|
Sport mode switch pressed
|
Sport Mode
|
Vehicle Speed
|
-
|
0 km/h (0 MPH)
|
The scan tool displays km/h (MPH) depending on the current speed
of the vehicle.
|