Parameter
|
Expected Value
|
Definition
|
Operating Conditions: Ignition ON
|
Ambient Air Temperature
|
Varies
|
The scan tool displays the outside temperature in °C
(°F).
|
Battery Voltage
|
Varies
|
The scan tool displays the battery voltage in V.
|
Boost Pressure Sensor
|
Varies
|
The scan tool displays the engine boost pressure in %.
|
Coolant Level Switch
|
On/Off
|
The scan tool displays Off or On depending on the coolant
level.
|
Driver Information Center Switch
|
Varies
|
The scan tool displays V depending on the driver information
center switch position.
|
Driver Information Center Switch
|
Inactive
|
The scan tool displays Inactive, Up, Down, Menu or Clear depending
on the driver information center switch position.
|
Engine Coolant Temperature
|
Varies
|
The scan tool displays the engine coolant temperature in °C
(°F).
|
Engine Oil Pressure
|
Varies
|
The scan tool displays the engine oil pressure in kPa (PSI).
|
Engine Speed
|
Varies
|
The scan tool displays the engine speed in RPM.
|
Fuel Level Sensor
|
Varies
|
The scan tool displays the fuel level in %.
|
Key in Ignition Status
|
Active/Inactive
|
The scan tool displays Active or Inactive. This is the state of
the key in ignition switch.
|
Odometer Lock Status
|
Active/Inactive
|
The scan tool displays Active or Inactive depending on the state
of the odometer.
|
Reset Switch
|
Active/Inactive
|
The scan tool displays Active or Inactive depending on the reset
switch position.
|
Vehicle Speed
|
Varies
|
The scan tool displays the vehicle speed in km/h (MPH).
|
Washer Fluid Heater
|
On/Off
|
The scan tool displays On or Off. On is displayed, when the washer
fluid heater is active.
|
Washer Fluid Level Switch
|
On/Off
|
The scan tool displays On or Off depending on the washer fluid
level.
|
