DTC P0602, P0605-P0607, P060A, P060B, P0610, P061A, P061C,
P062B, or P062F
Diagnostic Instructions
DTC Descriptors
DTC P0602 00: Control Module Not
Programmed |
DTC P0605 00: Control Module Programming Read
Only Memory Performance |
DTC P0606 38: Control Module Processor
Performance Supervision Software Malfunction |
DTC P0606 3A: Control Module Processor
Performance Incorrect Component Installed |
DTC P0606 3C: Control Module Processor
Performance Internal Communication Malfunction |
DTC P0607 03: Control Module Performance |
DTC P0607 07: Control Module Performance |
DTC P0607 39: Control Module Performance |
DTC P0607 3B: Control Module Performance |
DTC P0607 3D: Control Module Performance |
DTC P0607 3E: Control Module Performance |
DTC P0607 58: Control Module Performance |
DTC P060A 3B: Control Module Monitoring
Processor Performance Self-Test Malfunction |
DTC P060A 3C: Control Module Monitoring
Processor Performance Internal Communication Malfunction |
DTC P060B 38: Control Module Analog to Digital
Converter Performance Supervision Software Malfunction |
DTC P060B 39: Control Module Analog to Digital
Converter Performance Internal Malfunction |
DTC P060B 3B: Control Module Analogue to
Digital Converter Performance Self-Test Malfunction |
DTC P060B 55: Control Module Analog to Digital
Converter Performance Too Few Transitions |
DTC P060B 56: Control Module Analog to Digital
Converter Performance Too Many Transitions |
DTC P0610 00: Control Module Vehicle Options
Incorrect |
DTC P061A 51: Control Module Torque System
Circuitry Performance |
DTC P061C 00: Control Module Engine Speed
System Circuitry Performance Malfunction |
DTC P062B 31: Control Module Fuel Injector
Control Performance |
DTC P062B 32: Control Module Fuel Injector
Control Performance |
DTC P062B 33: Control Module Fuel Injector
Control Performance |
DTC P062B 34: Control Module Fuel Injector
Control Performance |
DTC P062B 35: Control Module Fuel Injector
Control Performance |
DTC P062B 36: Control Module Fuel Injector
Control Performance |
DTC P062B 38: Control Module Fuel Injector
Control Performance |
DTC P062B 39: Control Module Fuel Injector
Control Performance |
DTC P062B 3A: Control Module Fuel Injector
Control Performance |
DTC P062B 3B: Control Module Fuel Injector
Control Performance |
DTC P062B 3C: Control Module Fuel Injector
Control Performance |
DTC P062B 3D: Control Module Fuel Injector
Control Performance |
DTC P062B 3E: Control Module Fuel Injector
Control Performance |
DTC P062B 3F: Control Module Fuel Injector
Control Performance |
DTC P062B 40: Control Module Fuel Injector
Control Performance |
DTC P062B 57: Control Module Fuel Injector
Control Performance |
DTC P062B 58: Control Module Fuel Injector
Control Performance |
DTC P062B 59: Control Module Fuel Injector
Control Performance |
DTC P062B 5A: Control Module Fuel Injector
Control Performance |
DTC P062B 5B: Control Module Fuel Injector
Control Performance |
DTC P062F 31: Control Module Long Term Memory
Performance Internal Checksum Error |
DTC P062F 32: Control Module Long Term Memory
Performance General Memory Malfunction |
DTC P062F 33: Control Module Long Term Memory
Performance Special Memory Malfunction |
DTC P062F 34: Control Module Long Term Memory
Performance RAM Malfunction |
DTC P062F 35: Control Module Long Term Memory
Performance ROM Malfunction |
DTC P062F 36: Control Module Long Term Memory
Performance EEPROM Performance/Malfunction |
DTC P062F 37: Control Module Long Term Memory
Performance Software Malfunction |
Circuit/System Description
These DTCs apply to internal microprocessor integrity conditions
within the engine control module (ECM). This diagnostic also
addresses if the ECM is not programmed.
Conditions for Running the DTC
P0602, P0605, P0606, P0607, P060A, P060B, P0610, P061A, and
P061C
• |
The DTCs run continuously once
the above condition is met. |
P062B
• |
The DTC runs continuously once
the above condition is met. |
Conditions for Setting the DTC
P0602 and P0610
The ECM detects that programming is incomplete for greater than 1
s.
P0605, P0606, P0607, P060A, P060B, P061A and P061C
The ECM detects an internal condition for greater than 1 s.
P062B
The ECM detects an internal fuel injector condition once per
camshaft revolution.
P062F
The ECM detects an internal EEPROM Malfunction.
Action Taken When the DTC Sets
• |
DTCs P0602, P0606 38, P0606
3A, P060B, P0610, P061C, P062B 31, P062B 32, P062B 33, P062B 34,
P062B 35, P062B 57, P062B 58, P062B 59, P062B 5A, P062B 5B, P062F
32, P062F 33, and P062F 04 are Type A DTCs. |
• |
DTCs P0605, P0606 3C, P0607,
P060A, P061A, P062B 36, P062B 40, P062F 31, P062F 35, P062F 36 and
P062F 37 are Type C DTCs. |
Conditions for Clearing the DTC
• |
DTCs P0602, P0606 38, P0606
3A, P060B, P0610, P061C, P062B 31, P062B 32, P062B 33, P062B 34,
P062B 35, P062B 57, P062B 58, P062B 59, P062B 5A, P062B 5B, P062F
32, P062F 33 and P062F 4 are Type A DTCs. |
• |
DTCs P0605, P0606 3C, P0607,
P060A, P061A, P062B 36, P062B 40, P062F 31, P062F 35, P062F 36 and
P062F 37 are Type C DTCs. |
Reference Information
DTC Type Reference
Powertrain Diagnostic Trouble Code (DTC) Type Definitions
Circuit/System Testing
P0602 or P0610
Program the ECM. If DTC P0602 or P0610 sets after programming,
perform the following steps:
• |
Ensure that all tool
connections are secure. |
• |
Ensure the programming
equipment is operating correctly. |
• |
Ensure the correct software
and the correct calibration is used. |
• |
Attempt to program the K20
Engine Control Module. |
⇒ |
If DTC P0602 sets, replace the K20 Engine Control
Module. |
P0605, P0606, P0607, P060A, P060B, P061A, P061C, P062B or
P062F
1. |
Observe the Freeze
Frame/Malfunction Records with a scan tool. |
2. |
Clear the DTCs with a scan
tool. |
3. |
Ignition OFF for 30 s.
|
4. |
Operate the vehicle within the
Conditions for Running the DTC. You may also operate the vehicle
within the conditions that you observed from the Freeze
Frame/Malfunction Records. |
⇒ |
If DTCs P0605, P0606, P0607, P060A, P060B, P061A,
P061C, P062B or P062F failed this ignition, replace the K20 Engine
Control Module. |
Repair Instructions
Perform the
Diagnostic Repair Verification after completing the diagnostic
procedure.
Control Module References for ECM replacement, setup, and
programming
|