vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Throttle Body Assembly Replacement > < Heated Oxygen Sensor Replacement

Throttle Body Adapter Replacement

Removal Procedure

1. Remove the throttle body assembly. Refer to Throttle Body Assembly Replacement .

           2191175


2. Remove the 3 throttle body adapter bolts (3).
3. Remove the throttle body adapter (1).
4. Remove and DISCARD the throttle body adapter seal (2).

Installation Procedure


           2191175


1. Install a NEW throttle body adapter seal (2).
2. Install the throttle body adapter (1).

Caution: Refer to Fastener Caution .

3. Install 3 throttle body adaptor bolts (3) and tighten to 8 N·m (71 lb in) .
4. Install the throttle body assembly. Refer to Throttle Body Assembly Replacement .

Throttle Body Assembly Replacement > < Heated Oxygen Sensor Replacement