Astra J
Throttle Body Assembly Replacement (1.4L LUH and LUJ)Removal Procedure
|
1. | Open the hood. |
2. | Disconnect the throttle body wiring harness plug (1). |
3. | Remove the charge air cooler outlet air hose from the throttle body. Refer to Charge Air Cooler Outlet Air Hose Replacement . |
4. | Remove the 4 throttle body bolts (3). |
5. | Remove the throttle body (2) along with the throttle body seal ring (1). |
Installation Procedure
1. | Install the throttle body (2) along with a NEW throttle body seal ring (1). |
Caution: Refer to Fastener Caution . |
2. | Install the 4 throttle body bolts (3) and tighten to 8 N·m (71 lb in) . |
3. | Install the charge air cooler outlet air hose to the throttle body. Refer to Charge Air Cooler Outlet Air Hose Replacement . |
4. | Connect the throttle body wiring harness plug (1). |
5. | Close the hood. |