Evaporative Emission Canister Purge Solenoid Valve Replacement
(1.6L LLU)
Special Tools
EN-6015 Closure Plugs
For equivalent regional tools, refer to
Special Tools .
Removal Procedure
3. |
Disconnect the evaporative
emission canister purge solenoid valve wiring harness plug
(2). |
4. |
Remove the evaporative
emission hose (1). |
5. |
Remove the evaporative
emission canister purge solenoid valve connector from the intake
manifold (4). |
6. |
Close the vents with the
EN-6015 plugs . |
7. |
Remove the evaporative
emission canister purge solenoid valve (3) from the evaporative
emission canister purge solenoid valve bracket (5). |
Installation Procedure
1. |
Install the evaporative
emission canister purge solenoid valve (3) to the evaporative
emission canister purge solenoid valve bracket (5). |
2. |
Remove the EN-6015
plugs . |
3. |
Install the evaporative
emission canister purge solenoid valve connector to the intake
manifold (4). |
4. |
Install the evaporative
emission hose (1). |
5. |
Connect the evaporative
emission canister purge solenoid valve wiring harness plug
(2). |
|