Heated Oxygen Sensor Replacement - Sensor 1 (LDE, LXV, LUW,
2H0, LFH)
Callout
|
Component Name
|
|
Warning:
In order to avoid being burned, do not service
the exhaust system while it is still hot. Service the system when
it is cool. |
Preliminary Procedures
Disconnect the battery negative cable. Refer to
Battery Negative Cable Disconnection and Connection .
|
1
|
Heated Oxygen Sensor
Caution: Refer to
Fastener Caution .
Procedure
|
1. |
Disconnect the heated oxygen sensor wiring harness
connector. |
|
2. |
Remove the heated oxygen sensor. |
|
3. |
When re-using the heated oxygen sensor, coat the
thread with assembly paste. |
Tighten
42 N·m (31 lb ft)
Special Tools
EN-6179 Heated Oxygen Sensor Remover /
Installer
For equivalent regional tools, refer to
Special Tools .
|
|
| |
|
