vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Air Cleaner Element Replacement > < Fuel Injector Flow Rate Programming

Camshaft Position Sensor Replacement

Removal Procedure

1. Open the hood.
2. Remove the air cleaner outlet front duct. Refer to Air Cleaner Outlet Front Duct Replacement .

           2191786


3. Disconnect the camshaft position sensor wiring harness plug (3) and hang aside.
4. Remove the camshaft position sensor bolt (2).
5. Remove the camshaft position sensor (1).

Installation Procedure


           2191786


1. Install the camshaft position sensor (1).

Caution: Refer to Fastener Caution .

2. Install the camshaft position sensor bolt (2) and tighten to 10 N·m (89 lb in) .
3. Connect the camshaft position sensor wiring harness plug (3).
4. Install the air cleaner outlet front duct. Refer to Air Cleaner Outlet Front Duct Replacement .
5. Close the hood.

Air Cleaner Element Replacement > < Fuel Injector Flow Rate Programming