Generator Bracket Installation (without Start/Stop System)
1. |
Install the generator bracket
(1). |
2. |
Install the 3 generator
bracket bolts (2) and tighten to 22 N·m (16 lb
ft) . |
3. |
Install the exhaust gas
recirculation valve vacuum tank bracket (1). |
4. |
Install the 2 exhaust gas
recirculation valve vacuum tank bracket bolts (2) and tighten to
22 N·m (16 lb ft) . |
5. |
Clip in the turbocharger
wastegate actuator pipe to the turbocharger wastegate actuator pipe
clip. |
|