vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Exhaust Gas Recirculation Valve Cooler Installation > < Engine Oil Cooler Inlet Pipe Installation

Astra J

Starter Installation


           2190512


1. Install the starter (2).

Caution: Refer to Fastener Caution

2. Install the starter stud (3) and tighten to 25 N·m (18 lb ft) .
3. Install the starter bolt (1) and tighten to 25 N·m (18 lb ft) .

Exhaust Gas Recirculation Valve Cooler Installation > < Engine Oil Cooler Inlet Pipe Installation