Camshaft Timing Chain Installation
Special Tools
| • |
EN-955-1
Fixing Pin from EN-955 Kit |
For equivalent regional tools, refer to
Special Tools .
| 1. |
The engine should be adjusted
to TDC. |
| 2. |
The crankshaft should be
locked with EN-952 fixing pin . |
| 3. |
The camshaft should be locked
with EN-953-A fixing tool . |
| 4. |
Install the timing chain (1)
along with the crankshaft sprocket (2). |
| 5. |
Install the timing chain
tensioner shoe (1). |
| 6. |
Install the timing chain
tensioner shoe bolt (2) and tighten to 20 N·m (15 lb
ft) . |
| 7. |
Install the timing chain guide
right side (1). |
| 8. |
Install the 2 timing chain
guide right side bolts (2) and tighten to 8 N·m (71
lb in) . |
| 9. |
Push the timing chain (2) in
direction to the timing chain tensioner (1) and Remove
EN-955-1 fixing pin (3). |
The upper timing chain guide will be installed after the
installation of the engine front cover and the fastening of the
camshaft sprockets.
|
