Engine Oil Cooler Installation
|
Note: Lubricate the
oil cooler seal (8) with clean engine oil.
|
1. |
Install the engine oil cooler
assembly (6) along with 2 NEW sealings (8) and (9). |
2. |
Install the 3 oil cooler bolts
(5) and tighten to 10 N·m (89 lb in)
. |
3. |
Install the oil cooler coolant
outlet pipe bolt (7) and tighten to 10 N·m (89 lb
in) . |
4. |
Install the oil cooler coolant
outlet hose (2) to the engine coolant thermostat housing.
|
5. |
Install the oil cooler coolant
outlet hose clamp (1). |
6. |
Install the oil cooler coolant
inlet hose (4) to the water outlet. |
7. |
Install the oil cooler coolant
inlet hose clamp (3). |
|