vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Cylinder Head Replacement - 1.4L LUH and LUJ > < Turbocharger Oil Feed Pipe Replacement

Astra J

Turbocharger Oil Return Pipe Replacement

Removal procedure

1. Open the hood.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle

           2192288




Note:  Simplified Graphic. DO NOT remove the warm up three way catalytic converter.
3. Remove the 2 turbocharger oil return pipe bolts (1).
4. Place a drain pan below the vehicle.
5. Release the turbocharger oil return pipe connector (4) and disconnect the turbocharger oil return pipe from the engine block.
6. Remove the turbocharger oil return pipe (2) and the gasket (3).

Installation Procedure

1. Clean the sealing surfaces.

           2192288



2. Install the turbocharger oil return pipe (2) in compound with a NEW gasket (3) and connect to the engine block.

Caution: Refer to Fastener Caution .
3. Install the 2 turbocharger oil return pipe bolts (1) and tighten to 8 N·m (71 lb in) .
4. Lower the vehicle.
5. Check engine oil level.
6. Close the hood.

Cylinder Head Replacement - 1.4L LUH and LUJ > < Turbocharger Oil Feed Pipe Replacement