Camshaft Cover Replacement (1.6L LDE, LXV, 1.8L 2H0, LUW and
LFH)
Removal Procedure
3. |
Unclip the ECM wiring harness
guide (1) from the cylinder head cover. |
4. |
Disconnect the wiring guide
(2). |
6. |
Remove the 11 bolts (2,
3). |
7. |
Remove the camshaft cover
(1). |
Installation Procedure
1. |
Install the camshaft cover
(1). |
|
Insert a NEW gasket in the cylinder head cover. |
2. |
Install the 11 bolts (2, 3)
and tighten to 8 N·m (71 lb in) .
|
4. |
Clip in the ECM wiring harness
guide (1) to the cylinder head cover. |
5. |
Connect the wiring guide
(2). |
|