Engine Coolant Thermostat Housing Installation
| 1. |
Clean sealing surface.
|
| 2. |
Install a NEW engine coolant
thermostat housing seal. |
| 3. |
Install the engine coolant
thermostat housing (2). |
|
Note: Screw in the 4
bolts until the engine coolant thermostat housing is in contact
with the cylinder head.
|
| 4. |
Install the 4 engine coolant
thermostat housing bolts (3) and tighten to 2 N·m
(18 lb in) . |
|
Caution: Following the proper fastener tightening sequence and
torque is essential. Failure to do so may fracture the thermostat
housing. |
| 5. |
Tighten the 4 engine coolant
thermostat housing bolts to 8 N·m (71 lb
in) in sequence (1-2-3-4). |
| 6. |
Install the engine coolant
thermostat housing retainer (1). |
| 7. |
Install the engine coolant
thermostat housing retainer nut (4) and tighten to 6
N·m (53 lb in) . |
|
