Engine Oil Cooler Housing Installation (1.6L LLU)
1. |
Clean the engine oil cooler
housing to engine block sealing surfaces. |
3. |
Install the engine oil cooler
inlet pipe (3). |
4. |
Install the engine oil cooler
housing (1) and the 5 engine oil cooler housing bolts (2) and
tighten to 25 N·m (18 lb ft) . |
5. |
Install the thermostat housing
coolant pipe (2) to the engine oil cooler housing. |
6. |
Install the 2 thermostat
housing coolant pipe bolts (1) and tighten to 8 N·m
(71 lb in) . |
|