Camshaft Position Actuator Adjuster Installation
Special Tools
EN-45059 Torque Angle Sensor Kit
For equivalent regional tools, refer to
Special Tools .
|
Note: A second
technician is required.
|
1. |
Install the camshaft adjuster
(3) and NEW camshaft adjuster bolts (2) and tighten the bolts in
three passes: |
|
Hold at the appropriate camshaft hexagon. |
|
1.1 |
First pass tighten to
65 N·m (48 lb ft) |
|
1.2 |
Second pass to
120° , using the EN-45059
sensor kit |
|
1.3 |
Third pass to
15° , using the EN-45059
sensor kit |
2. |
Install the 2 camshaft
adjuster closure plugs (1) and tighten to 30 N·m (22
lb ft) . |
|