Vauxhall Workshop Service and Repair Manuals > Astra J > Engine | Engine mechanics - 1.6L (LDE, LLU), 1.8L (2H0) | Repair Instructions - Off Vehicle

Crankshaft Balancer Installation

•	EN-652 Flywheel Holder

•	EN-45059 Torque Angle Sensor Kit

For equivalent regional tools, refer to Special Tools .

1.	Install the EN-652 holder (1), lock the flywheel (2) or the automatic transmission flex plate via the starter ring gear.

Caution: Refer to Fastener Caution .

Caution: Refer to Torque-to-Yield Fastener Caution .

2.	Install the crankshaft balancer (2) and a NEW bolt (1) and tighten in 3 passes using the EN-45059 sensor kit :

2.1

First pass to 95 N·m (70 lb ft) .

2.2

Second pass to 45° .

2.3

Third pass to 15° .