Engine Flywheel Installation (LDE, LED, LFJ, LXV, 2H0,
LUW)
Special Tools
• |
EN-45059
Torque Angle Sensor Kit |
For equivalent regional tools, refer to
Special Tools .
1. |
Clean the thread in the
crankshaft. |
2. |
Install the flywheel
(2). |
3. |
Install the EN-652
holder (1). |
4. |
Install the 6 NEW flywheel
bolts (1, 2) and tighten the bolts in 3 passes using the
EN-45059 sensor kit : |
|
4.1 |
First pass to 35
N·m (26 lb ft) . |
|
4.2 |
Second pass to additional
30° . |
|
4.3 |
Third pass to an additional
15° . |
5. |
Remove the EN-652
holder . |
|