Intake Manifold Assemble (1.6L LDE, LED, LFJ, and LXV)
1. |
Install the 4 multiport fuel
injector seals (6). |
2. |
Install the multiport fuel
injection fuel rail (4) and the fuel injectors (5) to the intake
manifold (7). |
3. |
Install the 2 multiport fuel
injection fuel rail bolts and tighten to 9 N·m (80
lb in) . |
4. |
Install the evaporative
emission canister purge solenoid valve bracket (1) to the intake
manifold (7). |
5. |
Install the 2 evaporative
emission canister purge solenoid valve bracket bolts (2) and
tighten to 8 N·m (71 lb in) . |
6. |
Install the NEW intake
manifold seal (3) to the intake manifold (2). |
7. |
Install the NEW throttle body
seal (1). |
8. |
Install the intake manifold
mount (2) to the intake manifold (1) and tighten to 9
N·m (80 lb in) . |
9. |
Install the manifold absolute
pressure sensor (1) to the intake manifold (2). |
10. |
Install the intake manifold
absolute pressure sensor bolt and handtighten. |
|