Camshaft Sprocket Installation
Special Tools
• |
EN-47634
Camshaft Sprocket Holding Tool |
For equivalent regional tools, refer to
Special Tools .
1. |
Install the camshaft sprocket
(1) and loosely install the camshaft sprocket bolt (2).
|
2. |
Install the EN-47634
holding tool (2) with EN-956-1 extension (3)
in order to hold the camshaft sprocket. |
3. |
Tighten the camshaft sprocket
bolt in two passes: |
|
3.1 |
First pass to 50
N·m (37 lb ft) . |
|
3.2 |
Second pass to 120
N·m (89 lb ft) . |
4. |
Remove the EN-47634
holding tool and EN-956-1 extension .
|
|