Piston and Connecting Rod Disassemble
Special Tools
EN-46745 Piston Pin Retainer Remover/Installer
For equivalent regional tools, refer to
Special Tools .
|
Warning:
Handle the piston carefully. Worn piston rings
are sharp and may cause bodily injury. |
| 1. |
Disassemble the piston rings
from the piston (2). Use a suitable tool to expand the rings. The
piston rings must not be reused. |
|
Note: Two retainers
hold the piston pins in place. No special tools are required to
remove the piston pins. Ensure that the piston pin is not damaged.
Do not reuse the retainers.
|
| 2. |
Remove the piston pin
retainers using the EN-46745 remover/installer
. |
| 3. |
Remove the piston pin
(1). |
| 4. |
Disassemble the piston from
the connecting rod (3). |
|
