Callout
|
Component Name
|
Preliminary Procedures
|
3. |
Loosen the 3 charge air cooler outlet air hose
bolts from the throttle body and the charge air cooler outlet air
hose bracket bolt and hang the hose aside. |
|
4. |
Disconnect the engine coolant temperature sensor
wiring harness plug. |
|
5. |
Remove the engine control module wiring harness
bracket. |
|
1
|
Camshaft Rear Cover Bolt (Qty: 3)
Caution: Refer to
Fastener Caution .
Tighten
9 N·m (80 lb in)
|
2
|
Camshaft Rear Cover
|
3
|
Camshaft Rear Cover Gasket
Procedure
Install a NEW camshaft rear cover gasket prior installation of the
camshaft rear cover.
|