Step
|
Action
|
Yes
|
No
|
1
|
Did you review the Steering Wheel and Column Description and
Operation and perform the necessary inspections?
|
Go to Step 2
|
Go to
Steering Wheel and Column Description and Operation
|
2
|
Verify that the steering column is loose.
Is the steering column loose?
|
Go to Step 3
|
System OK
|
3
|
Inspect the steering column mounting features for the following
conditions.
| • |
Steering column mounting fasteners for
looseness |
| • |
Steering column mounting features are sheared |
Are the steering column mounting features loose?
|
Go to Step 5
|
Go to Step 4
|
4
|
Inspect the upper and/or lower bearings for looseness.
Are any of the bearings worn or loose?
|
Go to Step 6
|
Go to Step 7
|
5
|
Note: If the steering
column mounting feature is damaged or sheared, the steering column
will need to be replaced. Refer to
Steering Column Replacement .
Tighten the steering column mounting fasteners to specifications.
Refer to
Fastener Tightening Specifications .
Did you complete the repair?
|
Go to Step 7
|
-
|
6
|
Note: If the steering
column upper and/or lower bearings are not serviceable, the
steering will need to be replaced. Refer to
Steering Column Replacement .
Replace the upper and/or lower bearings, if serviceable.
Did you complete the repair?
|
Go to Step 7
|
-
|
7
|
Operate the steering column in order to verify the repair.
Did you correct the condition?
|
System OK
|
Go to Step 3
|
