vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Engine Damping Block, Front Left, Remove and Install > < Illustration: Arrangement of Engine Damping Blocks

Corsa B

 

Engine Damping Block, Front Right, Remove and Install  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Attach engine to Engine Bridge KM-263-B (or MKM-883-1). Unscrew fastening bolts for engine damping block from bracket on cylinder block (1). Unscrew engine damping block from front frame side member (2).  

Object Number: 616195 Size: DEFAULT  Clean   

Recut thread in front frame side member to remove residual locking compound.  

Object Number: 616192 Size: DEFAULT  Install, Connect   

Bolt engine damping block to front frame side member and bracket to cylinder block. Remove Engine Bridge KM-263-B (or MKM-883-1).  

Object Number: 616199 Size: DEFAULT  Tighten (Torque)   

Engine damping block to side member - 65 Nm / 48 lbf. ft. 1) 
Bracket for engine suspension to cylinder block - 45 Nm / 33 lbf. ft.  

Object Number: 2394135 Size: DEFAULT

1)  Bolt must be re-cut before re-use and inserted after being coated with bolt locking compound (red).  

 

 

Engine Damping Block, Front Left, Remove and Install > < Illustration: Arrangement of Engine Damping Blocks