Vauxhall Workshop Service and Repair Manuals

Special Service Tools  

KM-108   Installer / Remover Drift     KM-128-A   Test Equipment   To check the v-belt tension   KM-210-B   Remover   To remove steering gear   KM-263-B   Engine Lifter   To hold engine in conjunction with KM-252-2-A (cables).   KM-285   Wrench   To release and tighten hex lock nut in conjunction with commercially available torque wrench with ratchet, range 0 - 200 Nm / 0 - 148 lbf. ft.   KM-354-B   Pressure Gauge   To check the power steering fluid pressure

Special Service Tools (Continued)  

KM-472   Wrench   To release and tighten hex lock nut in conjunction with commercially available torque wrench with ratchet, range 0 -200 Nm / 0 - 148 lbf. ft.   KM-473   Installing Pipe   To drive retaining ring into steering gear   KM-507-C   Removing Forks   To press tie rod joint out of steering knuckle   KM-542-B   Checking Gauge   To check steering installation position.   KM-551-A   Checking Gauge   To check straight ahead position of steering gear   MKM-610   Torque Wrench 1/2" Drive   Range 30 -130 Nm / 22 - 96 lbf. ft.

Special Service Tools (Continued)  

MKM-611   Torque Wrench 3/8" Drive   Range 10 - 60 Nm / 7 - 44 lbf. ft.   MKM-883-1   Engine Bridge   To hold the engine   KM-998   Remover / Installer   To remove and install the EPS steering column   KM-J-4245   Ring Pliers   To remove and install circlip in steering gear   KM-J-22610   Pliers   To tighten retaining band for fastening bellows