Corsa B
Subject: Modification to immobiliser control unit casing with 90° ignition locks
Vehicles: Corsa-B, Tigra, Astra-F, Vectra-B, Omega-B, Sintra
Condition: The immobiliser control units will be modified during Model Year '98 on the casing with lugs inside the ring antenna. As a result the removal and installation procedure will be modified.
Remedy: The modified removal and installation procedure is described in this Technical Information Bulletin.
Parts:
When replacing spare parts, immobiliser control units with lugs can be used to replace control units without lugs. New ignition lock covers are required for control units with lugs. These may also be used for control units without lugs.
Time Allowances:
Important: The specified time allowances do not include the time allowance for the vehicle set-up of .2 hrs. For reimbursement of the vehicle set-up time of .2 hrs in warranty claims, enter the authorisation code ”T” and increase the main operation time allowance by .2 hrs. The authorisation code may be used only once per work order. It may only be used more than once if the workplace and workteam are changed at the same time.
|
||||||||||||||||||||||||||||||||||||||||||||