|
Front Member Bracket (Impact Absorber), Remove and
Install
 Remove
| 1. |
Detach front member (impact absorber) 
|
| 2. |
Detach bracket for front member (impact absorber)
|
|
|
Install
Important: When replacing the
impact absorber, please note the following.
| 1. |
New components no longer need to be painted |
| 2. |
The drilling locations must be marked out in
colour |
| 3. |
Apply protective wax to the mounting surfaces and
connecting flanges |
|
| 3. |
Attach bracket for front member (impact absorber)
|
| 4. |
Attach front member (impact absorber)
|
|
