Replace Interior Rear Panel (Partial Replacement)
- Models F 08, F 08 & W5L, F 68
Note: There are
special "left" and "right" side dealer sections available for
partial replacement. Only work that deviates from the operation
"Inner Rear End Panel, Replace" is described.
Remove
1. |
Detach attaching parts
|
2. |
Drill off inner rear end panel (partial replacement).
|
3. |
Partial replacement, dealer's cuts, left and right side
1. |
Dealer section approx. 210 mm over centre of
vehicle to the left |
2. |
Dealer section approx. 210 mm over centre of
vehicle to the right |
|
|
|
Install
4. |
Adjust rear end panel (partial replacement) and fit
• |
Apply spot-welding paint
|
• |
Seal body seams, apply underseal, apply preservative to cavity
|
|
5. |
Attach rivet nuts to new component
Note: When replacing
the inner rear end panel (partial replacement) of F 08 &
W5L.
|
|
|
|