Fuel Filler Flap, Remove and Install
|
1. |
Closure cap (1), fuel filler flap
|
2. |
Push seal ring on to fuel filler flap (2)
|
3. |
Pull away seal ring step by step all round (3)
|
4. |
Apply single component cyanoacrylate adhesive in guide (4)
Note: Comply with
instructions for use of adhesive! Do not apply adhesive to visible
areas!
|
|
Install
5. |
Fuel filler flap, closure cap.
Note: Stickers with
data on tyre pressures are available from Aftersales.
|
|