|
External Paint Areas, Production Plastic Parts
| 1. |
To ensure that the paint structure is permanent and that the
lifetime and safety of the painted parts are not affected, always
use the relevant paint system. The paint systems are described in
detail in the current "Paint Repair Systems" brochures.
|
| 2. |
The systems describe the application of paint to standard
painted parts and new primed parts in conjunction with various
painting stages. There is a risk of reduced adhesion when service
painting unprimed plastic parts. When painting plastic parts,
observe the application instructions specified in the paint system.
Excessively thick layers of paint can change the specified
mechanical and chemical design properties of the plastic.
|
| 3. |
Paint systems for standard painted plastic parts:
|
|
Paint system
|
|
1 = Polycarbonate
|
(PC)
|
3, 4
|
|
2 = Polyurethane, hard
|
(PUR)
|
3, 4
|
|
3 = Acrylonitrile-butadiene-styrene
|
(ABS)
|
3, 4
|
|
4 = Polyamide
|
(PA)
|
3, 4
|
|
5 = Polypropylene
|
(PP/EPDM)
|
3, 4
|
|
| 4. |
In case of multiple specifications, note designation on inside
of part in question. Paint strippers are not suitable for plastic
parts.
|
|
