Airbag Unit, Driver's Side, Remove and Install
Remove
1. |
Disconnect battery
Note: Wait for 1 minute
until capacitor has discharged
|
2. |
Detach airbag unit
• |
Unscrew 2x bolt (arrows)
|
|
3. |
Lift airbag unit carefully with MKM-604-29
• |
Unlatch and disconnect airbag wiring harness plug
|
|
|
|
Important: Always set aside
airbag unit with padded side upwards.
|
4. |
|
Install
Important: From the beginning of
Model Year 2001, vehicles with Rework Action 00-R-41 have been
repaired. For affected vehicles with this contact unit, the cables
must be provided with insulation tape (illustration, lower
arrow).
|
5. |
|
6. |
Install airbag unit
• |
Connect and latch wiring harness plug
|
|
8. |
Program volatile memories
|
|