Guide Sleeve – Active Head Restraint, Remove
and Install
Remove
1. |
Remove front seat head restraint
|
|
2. |
Make an unlocking hook for the active head restraint guide
sleeve out of standard commercial wire (diameter 2 mm to 2.5 mm
according to illustration. Mark insertion depth of 63-68 mm
Note: I The release
hook is flattened at the end with a suitable hammer.
|
3. |
Insert the unlocking hook opposite the unlocking button of the
guide sleeve for the active head restraint
• |
Unlock the guide sleeve and pull it out upwards
|
|
|
Install
4. |
Press in the guide sleeve for the active head restraint until
it engages in the front seat backrest
|
5. |
Install head restraint
|
|