|
Lock Striker – Rear Seat Backrest, Remove
and Install (Models F 08, F 68)
 Remove
| 1. |
Remove load compartment cover 
|
| 2. |
Fold rear seat backrest (3) forwards and open cover of lock
striker (1)
|
| 3. |
Detach lock striker, rear seat backrest (2)
|
|
|
Install
| 4. |
Install lock striker, rear seat backrest
| • |
Tighten 2x bolt 20 Nm
Note:
The rear seat backrest lock striker must latch easily into the rear
seat backrest lock, if necessary adjust correct position of the
striker lock at the bolts.
|
|
| 5. |
Fold back rear seat backrest and lock
|
| 6. |
Install load compartment cover
|
|
