vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Component Locator > < Recommended Torque Values

Corsa C

Pressure Sensor, Replace

  Remove

1.   Disconnect battery
•   Detach ground terminal
– Release nut
2.   Detach pressure sensor
•   Disconnect wiring harness plug (1) from pressure sensor
•   Unscrew pressure sensor (2) from hydraulic modulator
Note:   Collect any escaping brake fluid.
Object Number: 7361196 Size: DEFAULT


  Install

3.   Install pressure sensor
•   Screw pressure sensor into hydraulic modulator 20 Nm
•   Connect wiring harness plug
4.   Connect battery
•   Attach ground cable
– Tighten nut
5.   Brake System, Bleed
6.   Read out trouble codes and delete
7.   Program volatile memory

Component Locator > < Recommended Torque Values